Rubber Molding Glue 250 ml can

Rubber Molding Glue is suitable for bonding rubber moldings to polished, primed or painted metals, wood, various plastics.

Features:

• High initial adhesion
• Fast Drying
• Ready to use
• Brush top can
• Easily spreadable
• Cures transparently
• Resistant to ageing, water, petroleum, dilute acids and alkalis.
• Silicone Free

Application: Parts must be dry, free of dust and grease. Rubber molding glue is applied evenly to both bonding surfaces. Apply twice for absorbent materials. After a flash-off time of at least 10 minutes the bonding surfaces must be pressed together.

Notice:

Protect from direct sunlight and heat.

The Rubber Molding Glue should be stored cool and dry, at temperatures between + 59°F (15° C) and +77° F ( 25° C).

The processing information is recommendations based on our experiments and experiences; Your own tests must be carried out before each application. Due to the large number of applications as well as the storage and processing conditions, we do not guarantee a specific processing result. If our free customer service provides technical information or provides advice, this is done under exclusion of any liability, unless the advice or information is part of the contractually agreed scope of services we owe, or the consultant acted intentionally. We guarantee consistent quality of our products; we reserve the right to make technical changes and further developments.

This product can expose you to chemicals including Carbon tetrachloride, which is known to the State of California to cause cancer, and Toluene which is known to the State of California to cause birth defects or other reproductive harm.

For more information go to: https://www.p65warnings.ca.gov/