Skip to content Skip to navigation menu
Super RTV Silicone Black 200ml
Article number08933311 SDS
Quantity (Pack Size: 1) Unit Price
(Min) $48.760

Total:  $48.760

In Stock

Register or log in to your Wurth Account to view your custom pricing and to order professional products.

Super RTY Silicone black  200 mL

Technical Data

  • Chemical Basis: modified oxime silicone
  • State: thixotrope past
  • Skin forming time (ASTM-D-4678): 7 minutes
  • Dry surface: (ASTM-D-4678): approx. 10 minutes
  • Curing Speed: approx. 2mm/24hrs (73.4oF/50% r.h.)
  • Hardness Shore A (ASTM-D-676): 40
  • Tensile strength (ASTM-D-412): approx. 2.2 N/mm2
  • Elongation at rupture (ASTM-D-412): 270 - 300%
  • Thermal conductivity (ASTM-D-2214/70): 0.002 Jcm-1s-1K-1
  • Coefficient of thermal expansion (ASTM EB-31): 20 x 10-5 K-1
  • Dielectric strength (ASTM-D-149): 15 kV/mm
  • Dielectric constant @ 1MHz (ASTM-D-150): 2.8
  • Loss factor @ 1MHz (ASTM-D-150): 0.002
  • Volume resistance (ASTM-D-257): 1 x 1015 V/cm


Temp. Range

-76oF to +500oF(Briefly up to +599oF)


Application Area

Water pumps, oil pumps, front covers, cam shaft bearing covers, thermostat bodies, oil pans, gear box covers, power axle covers, sun roofs, doors


OE Specs

  • GM 1052751, 1052917
  • Ford D6AZ-19526-B
  • Chrysler 4318025
  • Fiat 9.55720/B
  • High-grade adhesive and sealing compound for use with motor vehicles.



  • Very good resistance to chemicals - suitable for use in critical areas in which the seal may temporarily be in contact with several fluids. This product shows an excellent resistance against motor and gear oils, refrigerants and anti-freeze.
  • Acid-free hardening system - non-corrosive and non-conductive, therefore no negative effects on electronic components or Lambda sensors.
  • High temperature stability - utilization in the temperature range on machinery and engines possible.
  • Sealant in a compressed air spray can - easy dosage without auxiliary devices. Optimum handling, which means that an even product application using the beads is possible.



Optimal adhesion is achieved on clean and dry surfaces. Old sealing materials must be removed completely from the sealing surface.

WarningThis product can expose you to Methanol which is known to the State of California to cause birth defects or other reproductive harm.

For more information go to:


Please Wait

Improve your Experience
You're using a web browser we don't support.
Try one of of these options to have better experience on Wurth USA Shop.
Supported Versions:
11 and above
Supported Versions:
30 and above
Supported Versions:
35 and above